program interrupt
英 [ˈprəʊɡræm ˌɪntəˈrʌpt]
美 [ˈproʊɡræm ˌɪntəˈrʌpt]
网络 程式中断; 程序中断
双语例句
- Post program controlled interrupt receiver
算后程序控制中断接收器 - The software in this system includes a monitor program, a LCD display program, an interrupt service program, a computing program and so on.
该系统的软件主要包括监控程序、中断服务程序、计算程序和显示程序等。 - Then, the whole systematic architecture, some hardwares and firmware program were detailed, finally, the main program and interrupt service program were provided.
洋细论述了系统的总体结构、部分硬件设计和相应固件程序的实现，给出了主程序和中断服务程序流程图。 - The main program and interrupt service routine ( ISR) are realized by using modularized software design method.
软件采用模块化软件设计的方法设计了控制系统主程序、中断服务程序及中断服务子程序。 - Finally, main program and interrupt and sampling program are introduced.
最后介绍了系统软件主程序以及中断及其采样程序设计。 - According to the hardware scheme of control system, the software realization scheme is given, which includes: the design flow chart of harmonic separating algorithm, the main program and its interrupt service routine.
根据控制系统的硬件设计，确定了软件实现方案，给出了主程序及其中断服务程序、谐波分离算法程序的设计流程图。 - Software includes control main program, some interrupt programs, and functioning subprograms.
软件系统有控制主程序、各种中断响应程序和各功能子程序。 - And the SCM software system is composed of main program, serial interrupt service program, data transform subprogram, timer interrupt service program and pulse output subprogram.
下位机软件系统主要由主程序、串行中断服务程序、数据转换子程序、定时器中断服务程序和脉冲输出子程序构成。 - The system software includes the main program and interrupt service program.
系统软件主要由主程序和中断服务程序组成。 - The control of system has adopted the module program configuration, it consists of the main program, interrupt service subroutine and control algorithm subroutine, etc.
系统控制程序则采用了模块化设计结构，主要包括主程序、中断服务子程序、控制算法子程序等。 - Modular construction is adopted in the software system design. It is chiefly composed of main program, interrupt service routine, and several functioning modular subprogram.
软件系统的设计采用模块化结构，主要由主程序、中断服务程序和若干功能模块子程序组成。 - Finally, this paper discussed the software system design based on above hardware platform, including the DSP initialization program, the interrupt request service and speech coding.
最后讨论了基于上述硬件系统的软件设计，主要分为三个部分：DSP的初始化程序、中断服务程序和语音编解码程序。 - The system software includes: main program, interrupt program and the programmed algorithm about calendar of basic time, total days, week, the Gregorian calendar and the lunar calendar.
系统软件包括主程序和中断模块，基本时间、总天数、星期、公历、阴历等日历算法模块。 - The software including main program and interrupt service program, most work is done in interrupt services program, including phase current detection, data processing, PI regulator, sampling filter, zero compensation and so on.
程序由主程序和中断服务子程序构成，主体工作由中断服务程序完成，包括相电流检测、数据处理、采样滤波、零点补偿等。 - A software method is designed, the software of this system includes main program, interrupt service program of velocity loop, interrupt service program of position loop and CPLD decoding program, the code and program flow chart of this software system are given.
进行了稳定平台系统控制软件设计，该系统软件包括主程序、速率环中断服务程序、位置环中断服务程序和CPLD译码程序，给出了程序流程图并编写了代码。 - The DSP control software is roughly divided into main program, timer interrupt service routine and AD conversion interrupt service routine.
DSP控制软件主要分主程序、定时器中断服务程序和AD转换中断服务程序。 - The software for control system was designed according to the timing requirement, the main program and the interrupt service program were highlighted.
根据热丝TIG焊的时序要求，设计了控制系统的软件，重点介绍了主程序和中断服务程序。 - For the software part, some procedure flow charts of main program are offered and some problems of software realization, embedded systems transplantation, the main program and interrupt program design process are researched.
软件部分主要包括各个模块程序流程图的设计以及实现过程，重点介绍了嵌入式系统的移植，主程序和中断程序的设计过程。 - In software design, the thesis expounds the idea of program design, it also introduces main program, interrupt program and sub-program with given function.
软件部分主要阐述了程序设计思想，介绍了主程序，中断服务程序以及各功能子模块的原理和实现方法。 - Based on the hardware circuit designs and the depth knowledge of three-phase inverter modulation technique, phase lock technology and control technology, the system software is designed, including the main program design, interrupt service routine design and the main control software design.
在逆变器的硬件设计基础上，根据三相逆变器的调制技术、锁相技术和控制技术原理，进行了系统软件设计。主要包括主程序设计、中断程序的设计和主要控制软件设计。 - The layered modularized method was adopted to design the control soft. Static structure of soft contains application layer, equipment layer and core layer. Dynamic process of soft adopts front ground and back ground structure, including main program and interrupt service program.
软件采用分层模块化的方法设计，软件静态结构有应用层、设备层和核心层；软件动态过程采用前后台结构，包括主程序和中断服务程序两部分。 - The key modules are as follows: the main program, timer interrupt initialization subroutine, AD initialization subroutine, DMA interrupt subroutine and signal preprocessing subroutine.
给出了完整的软件设计，主要模块有：主程序设计、定时器中断子程序、A/D初始化子程序、DMA中断子程序和信号预处理子程序。 - In the aspect of software designing, the main program and timer interrupt subprogram as well as module subprograms are designed, the module algorithms are explained detailedly.
在软件设计方面，设计了主程序和定时器中断子程序及各模块子程序，并对各部分算法进行了详细说明。 - Software design flow chart of software analyze on main program, initialization procedure, the master program, ADC interrupt service routine, GPIO port inspection procedures and display program, and analyze on reliability of the software.
软件设计采用软件流程图的形式分析了主程序、初始化程序、主控程序、ADC中断服务程序、GPIO口检测程序以及显示程序的编写思路，并对软件的可靠性做了相应的分析。 - The software structure including main program interrupt subroutine flow chart was provided.
最后给出了控制系统软件结构框图，包括主程序和中断程序。 - Design and implement of the main program, serial interrupt routines, control routines and digital interrupt routines and so on.
设计实现系统主程序、串口中断子程序、控制子程序及开关量中断子程序等。 - The application program consists of main program, interrupt service program and some function modules.
其应用程序由主程序、中断服务程序和一些功能模块子程序组成。 - Analysis and design of the driving power of the main control program and the interrupt service routine.
分析并设计了驱动电源的主控制程序及中断服务程序。 - Though hall sensors to realize busbar voltage and current detection of protection circuit. Fourth, the control system software design, include the main program and interrupt subroutine.
保护电路中母线电压、电流的检测均由霍尔传感器实现。第四，在控制系统软件设计中，包括主程序和中断子程序。